Eplan adds cable harness software to its range

Monheim, 31st July 2012

Solution provider Eplan has taken over the development and sales rights to Harness Expert, the established 3D/2D software for cable harness engineering. The contract between software developer Linius Technologies and Eplan Software & Service was signed on 28/06/2012. This extension to its range will allow Eplan to offer its customers even more comprehensive support for all aspects of cable project management.

The strategic purchase of the Harness Expert software will provide considerable potential in the domestic and international markets. It will allow Eplan to tackle new segments of industry, including apparatus engineering, rail and specialist vehicle technology, aviation, tele-communications and medical technology. At the same time, there is an increasing demand from within its own customer base for the implementation of 1:1 connections via cable harnesses, as the number of circuit-board based units in control cabinets and devices is increasing constantly. This new software is the perfect complement to Eplan Electric P8, the company’s own CAE solution, which has previously handled the engineering of single wires and sheathed cables in the control cabinet and field components.

Customers can benefit from this consistent process integration, as all phases of the engineering process are supported, from planning through engineering through to cable harness design and production.

“The purchase of the Harness Expert software makes our portfolio broad enough to cover all engineering requirements within the global market. It also gives us a considerable competitive advantage, especially in the inter-national market,” said Maximilian Brandl, Chairman of the Executive Board at Eplan Software & Service.

Open for the IT Market

Harness Expert is an easy-to-use software suite which fully supports all aspects of cable harness engineering. Typical harness or wiring loom design processes are shown by the software in 3D. All 2D production documents are produced by the system, which allows comprehensive openness when it comes to the import and expert of third-party systems in design, administration and production. Integration between Eplan Electric P8 and Harness Expert provides all relevant wiring information, such as wire specifications, source/target information and bundle and socket assignments. This integrative workflow reduces engineering time and costs.

One workflow: design of mechanical systems and cable harness

The software provides different flexible approaches to designing a cable harness. Typically, this involves importing a 3D model from a conventional 3D CAD system, which then checks both the routes and design aspects such as clamps, clips, safety measures required and length calculations within the digital model. This does away with the time consuming and expensive construction of prototypes. As an alternative to importing, things can be done in a simpler way. For example, if a cable harness has been laid within an imported 3D model, the design of the 3D model and the cable harness can be passed back to the mechanical design department. The advantage is any impediments to the cable harness as a function of the design can be detected in the virtual model and measures taken immediately – with no need for physical prototypes at all. If 3D models are not available for process-related or organisational reasons, a cable harness can be designed quickly and easily within Harness Expert’s 3D editor.

Reports and test runs

Harness Expert uses the 3D or 2D cable harness layout to produce a wide range of reports required for quotation, ordering and production. Complete or individual parts lists, plug and splice lists, wiring and connection lists and reports on working processes in order to calculate time and costs. The data can be transferred directly to cable finishing systems such as Komax. In order to validate the cable harness design, the system has extensive, practical testing and checking functions for bending radii, fill levels, cable lengths, bundles without wires and connectors. The aim is to identify the possible inconsistency and errors at an early stage i.e. prior to prototype production and simplify corrections.

What is a cable harness?

A cable harness is a bundle of wires which normally have plugs or terminals at the end to create electrical connections to components and devices. It is considered a passive device. By fixing the wires together, e.g. by wrapping tape around, fitting them into protective sleeves or hoses or putting them in cable conduits, the individual wires are fixed in harness form and can be fitted in the same way as a single cable. The wires are also protected from dirt, heat and mechanical strain with a view to securing electrical properties such as insulation and conductivity throughout the service life of the product. Unlike conventional (sheathed) cable, cable harnesses are developed on a project or application-specific basis depending on the connections required. The benefits of this approach includes optimisation of the space and weight within the installation space and ideal conditions for connection requirements and pre-fitting/mass production can be achieved even for small batch sizes.

EPLAN Software & amp; Service

EPLAN Software & Service develops engineering solutions that accelerate the product engineering process. Interdisciplinary expert systems ensure maximum productivity and data integration. The solution provider develops tailor-made PDM and PLM customer concepts specifically and provides comprehensive services such as customising, consulting and training. Innovative development competence, a consistently practical approach, and international presence are the success factors.

About EPLAN:
EPLAN, a subsidiary of Rittal, within the Friedhelm Loh Group, is a leader in Computer Aided Engineering (CAE) software and provides innovative solutions for an array of engineering disciplines and industrial manufacturing. The company’s leading electrical engineering software suite significantly enhances accuracy, efficiency, workflow, and documentation. EPLAN has 25,000 customers with over 80,000 licence installations worldwide. For further information about EPLAN visit www.eplan.co.uk.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Create a website or blog at WordPress.com

Up ↑

%d bloggers like this: